smartpro 230v 1000va 750w ce/iec 60601-1 medical-grade line-interactive ups, extended run, tower, full isolation, usb, db9 serial model number: SMX1200XLHG description tripp lite's SMX1200XLHG offers medical-grade ups protection with built-in line-interactive voltage regulation, expandable battery runtime and intelligent monitoring with unattended shutdown capability. tested to ce/iec 60601-1 standard as medical electrical equipment. built-in isolation transformer with faraday shield offers full line isolation and removes common mode noise while maintaining full ac surge suppression in all modes. includes high quality hospital-grade plug and outlets. resistant to electrostatic discharge. 1000va power handling capacity supports computers, inter-networking equipment and other critical loads during commercial power failures. external battery connector allows configuration for up to several hours of runtime during power failures by adding one or more external battery packs bp36v15-2u (limit 1), bp36v42-3u (multi-pack compatible) and bp36v27-2us (multi-pack compatible). line interactive voltage regulation corrects brownouts as low as 155v and overvoltages as high as 274v back to normal 230v levels, saving battery reserves for use only during complete power failures. includes diagnostic leds and 2 built-in communications ports (1 usb, 1 db9) that work with included poweralert software and cabling to provide automatic unattended shutdown of connected network and pc applications. features ideal ups protection for applications in medical patient-care areas where ce/iec 60601-1 listed medical electrical equipment is required built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full ac surge suppression in all modes provides connected equipment with continuous power during short and long duration loss of commercial power expandable runtime is available with the addition of one or more external battery packs bp36v15-2u (limit 1), bp36v42-3u (multi-pack compatible) and bp36v27-2us (multi-pack compatible) line-interactive voltage regulation corrects brownouts and overvoltages from 155 to 274 volts back to usable 230v output levels, without using battery power full line isolation prevents shock potential and operational problems in sensitive electronic equipment resistant to electrostatic discharge highlights 1000va / 1kva line interactive, extended run tower ups maintains 230v nominal output over an input range of 155 to 274v professional features include serial port, iec320 plug & outlets, built-in isolation transformer input: iec c14 inlet (230v 5a) / output: 6 iec c13 (230v) applications ce/iec 60601-1 compliant ups provides ultimate safety and reliability for patient point of care solutions, telemedicine, nurse's stations, wireless communications systems, electronic prescribing applications, medical imaging and mission critical equipment. not recommended for life support applications package includes SMX1200XLHG medical grade tower ups system poweralert software and cabling warranty information instruction manual 1 / 4
supports loads up to 1000va/750w 27.5 min. half-load runtime (500va/375w), 11 min. full load runtime (1000va/750w) 6 protected outlets; 6-inch dongle with iec c14 inlet usb and db9 communication ports poweralert unattended shutdown software and complete cabling included complete surge protection, line isolation and emi/rfi noise filtering 5 diagnostic leds indicate ac present, on battery, voltage correction, overload & battery low/replace battery replacement door and back panel equipotential connection specifications output output volt amp capacity (va) 1000 output watt capacity (watts) 750 nominal output voltage(s) supported 220v; 230v; 240v nominal voltage details 230v nominal inverter output voltage frequency compatibility 50 / 60 hz frequency compatibility details automatic frequency selection output voltage regulation (line mode) -18%, +8% output receptacles (6) c13 input rated input current (maximum load) 5a nominal input voltage(s) supported 230v ac ups input connection type c14 inlet ups input cord length (ft.) 6 inch dongle, 16 gauge ups input cord length (m) 1.83 recommended electrical service 10a 230v voltage compatibility (vac) 230 input phase single-phase battery full load runtime (min.) 11 min. (750w) half load runtime (min.) 27.5 min. (375w) expandable battery runtime supports extended runtime with optional bp36v15-2u (limit 1) and bp36v42-3u external battery pack (multi-pack compatible) external battery pack compatibility bp36v15-2u (limit 1); bp36v42-3u (multi-pack compatible); bp36v27-2us (multi-pack compatible) 2 / 4
dc system voltage (vdc) 36 battery recharge rate (included batteries) less than 4.5 hours from 10% to 90% internal ups replacement battery cartridge rbc53 battery access battery access door allows hot swap battery replacement without powering connected equipment off typical battery lifespan 3-6 years, depending on usage voltage regulation voltage regulation description line interactive ups offers 2 boost levels of brownout correction and a single level of overvoltage adjustment to maintain usable, computer grade output without consuming battery power over an input voltage range of 155 to 274v ac. overvoltage correction input voltages between 245 and 274v ac are reduced by 9% undervoltage correction input voltages between 183 and 199 are boosted by 10% severe undervoltage correction input voltages between 156 and 182 are boosted by 21% user interface, alerts & controls switches yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions audible alarm 3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short beeps) and low battery (continuous tone) led indicators 5 leds indicate line power, battery power, overload, voltage regulation and battery low/replace status surge / noise suppression ups ac suppression joule rating 340 joules emi / rfi ac noise suppression yes ac suppression response time instantaneous physical installation form factors supported with optional accessories wallmount (upswm - tower mounting kit) primary form factor tower ups power module dimensions (hwd, in.) 12.7 x 7.5 x 9.1 ups power module dimensions (hwd, cm) 32.3 x 19 x 23.1 ups power module weight (lbs.) 45.5 ups power module weight (kg) 20.7 ups shipping dimensions (hwd / in.) 18.5 x 12.2 x 13.4 ups shipping dimensions (hwd / cm) 47 x 31 x 34 shipping weight (lbs.) 48.8 3 / 4
shipping weight (kg) 22 cooling method ups cooling via rear-exit fan ups housing material pvc environmental operating temperature range +32 to +104 degrees fahrenheit / 0 to +40 degrees celsius storage temperature range +5 to +122 degrees fahrenheit / -15 to +50 degrees celsius relative humidity 0 to 95%, non-condensing ac mode btu / hr. (full load) 252.2 battery mode btu / hr. (full load) 252.2 communications communications interface usb; db9 serial line / battery transfer transfer time 2-4 milliseconds low voltage transfer to battery power (setpoint) 155 high voltage transfer to battery power (setpoint) 274 special features grounding lug back panel grounding lug (equipotential connection) cold start (startup in battery mode during a power failure) cold-start operation supported certifications certifications tested to ce, iec 60601-1 (medical), class b (emissions) warranty product warranty period (international) 2-year limited warranty product warranty period (mexico) 2-year limited warranty product warranty period (puerto rico) 2-year limited warranty ? 2015 tripp lite. all rights reserved. all trademarks are the sole property of their respective owners. tripp lite has a policy of continuous improvement. specifications are subject to change without notice. photos may differ slightly from final products. 4 / 4
|
